Datasheet | Network Interface Cards
AT-2916SX
PCI Gigabit Fiber Interface Card
AT-2931SX
Advanced Manageability
Key Features
1000SX 32-bit PCI Gigabit
fiber interface card
The priority queuing andVirtual LAN features
offered by AT-2916SX can help users set-up
the network based on their own needs.The
comprehensive diagnostics and configuration
software suite provides system administrators
and engineers with a powerful tool to analyze
the interface card and check specific data.
Management Software
• VLAN support
Performance
• Link aggregation LACP
• Link aggregation smart switch
• Failover
AlliedTelesis’ AT-2916SX is a highly reliable
32-bit PCI Gigabit fiber interface card with 9KB
jumbo frames support for network upgrade
needs.The AT-2916SX helps to boost your
Gigabit Ethernet throughput ten times to
1000Mbps.With the 1000SX fiber-optic
connection, data transmission is both secure
and faster.
AT-2916SX Gigabit Ethernet fiber interface card
can also support up to 64VLANs and four
priority queues.
Advance Properties
• Jumbo frames
• Checksum offloading
• Secured transmissions
• Adaptive interrupts
In order to reduce CPU use, AlliedTelesis’
AT-2916SX uses the adaptive interrupts and
ultra-deep 96KB packet buffer. Coupled with
link aggregation and load balancing, AT-2916SX
achieves the best performance of its class for
server connectivity.
• TCP, UDP and IP checksum generation
and check
High Reliability
• Priority queuing
AT-2916SX Gigabit Ethernet fiber interface card
comes with a variety of reliability features that
are designed to maintain a connection as
long as possible, including: link aggregation and
failover.
• CPU task offload
(to reduce CPU utilization level)
• Remote boot (PXE 2.1)
• Compliant with theTrade Agreement Act
• Microsoft certified drivers
• RoHS compliant
• Low-profile and standard height brackets
included
• SNMP
• IPv6
• Windows Vista
• Also can be used in PCI-x bus
Allied Telesis
|