IS-SS-2RA
Stainless Steel Flush Mount Door Station with
Standard & Emergency Call Buttons
-INSTRUCTIONS-
The IS-SS-2RA is a stainless steel flush mount door station with standard and emergency call
buttons. The unit is equipped with ADA compliant lettering and Braille signage for both the
standard and emergency buttons. A call status indicator is included to meet ADA rescue assistance
requirements. The IS-SS-2RA must be programmed as a video door station and must connect to the
IS-CCU or IS-SCU control units.
IS-SS-2RA
NAMES & FUNCTIONS:
1. Microphone
2. Speaker
5. Signage with Braille
6. Call button
1
3. Name Placard
4. Call status indicator
7. Emergency button
2
3
4
FEATURES:
• Audio communication with calling area
• Two call buttons: Standard and Emergency
• ADA compliant lettering and Braille signage
• LED call status indicator
6
7
5
• CCTV input (Analog NTSC 1Vpp)
• Red mushroom button for emergency call
• Two programmable relay outputs for activation
of external systems/devices
PACKAGE CONTENTS:
• Name placard
• Stainless steel faceplate with tamper resistant
screws
Security Driver
INSTALLATION:
STEADY GREEN INDICATES CALL ANSWERED
CALL
• For flush mounting, cut a hole in the wall and
use supplied back box.
EMERGENCY
Box dimensions are:
IS-SS-2RA
Vandal-resistant Door Station
11-1/16” H x 5-7/8” W x 1-3/4” D
• For surface mounting, use the SBX-ISDVFRA
surface mount box. This box can mount to a
standard 1-gang box or to any flat surface.
Blank name
placard
Semi-flush backbox &
tamper-resistant screws
Pg.1
|