Woodstock Switch D4159 User Manual

Model D4159

220V/240V ON/OFF

Paddle Switch

Instruction Sheet

To reduce risk of serious burns, electrocu-

tion or death when installing this switch:

• Only use this switch to replace an existing

machine switch that has the same physi-

cal configuration and equivalent electri-

cal specifications/ratings.

• Installation must only be performed by an

electrician or qualified service personnel,

and all applicable electrical codes must

be adhered to.

Figure 1. D4159 220V/240V ON/OFF Paddle

Switch.

• Turn OFF and completely disconnect all

power sources to the machine before

installing the switch.

Introduction

The Model D4159 features a recessed ON (—)

button that can be disabled with a padlock, and

a large OFF paddle that ensures fast shut-off.

The switch assembly will mount on a standard

electrical box, or over a 1" x 2" opening.

• Do not use this switch in wet or damp

locations, or near explosive fumes or

flammable liquids. It is not sealed or

rated for these environments.

Specifications

• Make sure there is a verified machine

ground on the circuit this switch is

installed.

Rated HP ..........................................2 HP

Rated Voltage ............................ 220V/240V

Rated Current .....................................16A

Padlock Shaft Size ............................... ³⁄16"

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT

THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.

#16601TS

Printed in China