MKE 2-4 Gold-C
Microphones | Back-Electret Condenser Microphone
Cat. No. 004736
General Description
The MKE 2-4 Gold-C is a high-quality, sub-miniature clip-on lavalier micro-
phone which is suitable for both speech and instrument miking applica-
tions in all areas of live work. It fulfils the most stringent demands on
sound quality and is extremely rugged. A special Umbrella Diaphragm™
and a welded housing protect the MKE 2 Gold against sweat and moisture,
making it an ideal choice for theatrical productions. Colour: matt black.
Technical Data
Pick-up pattern .......................................................omni-directional
Frequency response .................................... 20 – 20,000 Hz 3 dB
Sensitivity
(free field, no load) (1 kHz) ...............................5 mV/Pa 2.5 dB
Nominal impedance .................................................................... 1 kΩ
Min. terminating impedance..................................................4.7 kΩ
Equivalent noise level
A-weighted (DIN IEC 651)........................................................ 26 dB
CCIR-weighted (CCIR 468-3).................................................... 39 dB
Max. SPL (1 kHz)...............................................142 dB (THD = 1 %)
Power supply.................................................................. 18 kΩ/7.5 V
Supply current...........................................................approx. 250 µA
Connector.................................................3-pin audio connector for
SK 50/SK 250/SK 5012
Cable length.................................................................................1.6 m
Dimensions .......................................................................... Ø 4.8 mm
Weight .............................................................................................. 1 g
Features
Umbrella Diaphragm™ protects the mic against sweat
Very high sound pressure handling capability
Versatile attachment due to an extensive range of accessories
Delivery includes: 1 MKE 2-4 Gold-C clip-on microphone
1 MZC 2-1 cap (short), 1 MZC 2-2 cap (long)
(for altering the frequency response curve)
capsule only
with MZC 2-2
with MZW 2
Recommended Accessories
MZ 2-1 Gold accessory set
Cat. No. 004741
consisting of: 2 MZW 2 (black and beige)
2 MZQ 02 (black and beige)
2 ZH 102 (anthracite and beige)
1 MZW 102
MZM 2
MZM 10
MZW 2
MZQ 02
ZH 102
1 carrying case
MZ 2-2 Gold accessory set
Cat. No. 004742
consisting of: 5 MZC 2-1 (black and beige)
5 MZC 2-2 (black and beige)
MZ 2-3 Gold accessory set
consisting of: 10 make-up protection caps
MZM 2/MZM 10 magnetic mount set
Cat. No. 004743
Cat. No. 001866
anthracite
nickel
anthracite
nickel
anthracite
beige
grey
Product Variants
Make-up
Protection Cap
MKE 2-60 Gold-C: suitable for K6/K6P powering
modules, cable length 3 m, 5 mV/Pa 2.5 dB, black
MKE 2-5 Gold-C: with open-ended cable,
cable length 4 m, 5 mV/Pa 2.5 dB, black
MKE 2-5-3 Gold-C: as MKE 2-5 Gold-C, but beige
MKE 2-4-3 Gold-C: as MKE 2-4 Gold-C, but beige
MKE 2-2R Gold-C: with co-axial plug for SK 2012,
cable length 1.6 m, 5 mV/Pa 2.5 dB, black
MKE 2-2R3 Gold-C: as MKE 2-2R Gold-C, but beige
MZW 102
MZC 2-1
MZC 2-2
Cat. No. 004733
Cat. No. 004735
Cat. No. 004738
Cat. No. 004739
black
beige
black
beige
red
Cat. No. 004734
Cat. No. 004737
|