WASHING MACHINE
User’s Manual
FEATURES
1
2
3
SAFETY INSTRUCTIONS
DESCRIPTION OF PARTS
CONTROL PANEL
4
WASHING PROCEDURE
Fuzzy(Digital) course
Blanket course
5
5
5
Super clean course
5
Speedy course
5
Wool course
5
Delay start course
6
Silver Wash button
6
MANUAL FUNCTIONS
INSTALLATION & MAINTENANCE
Environment
7
8
8
Levelling
8
Connecting the water supply hose
Assembling the rat protection panel
In case of pump-drained washer
Connecting the drain hose
How to put the detergent in
Water supply connector filter
Cleaning the filter net.
How to clean the filter
TROUBLESHOOTING
SPECIFICATIONS
8
9
9
9
9
Please read this manual before using and note
how to use in the proper manner.
Please be careful of keeping the manual.
Otherwise, it should be bought separately.
10
10
10
11
The User’s Manual is for common use.
Make use of the User’s Manual depending upon your washing machine model.
CODE NO : DC68-02154A
SAFETY INSTRUCTIONS
Please note that the following precautions for safety intend to prevent unpredictable danger and damage
by helping the proper use in safety.
When using hot water in washing, please make sure that the water should not exceed 50˚C.
• Plastic parts may be deformed or damaged, and an electric shock or a fire may take place.
WARNING
CAUTIONS
There might be a slight injury or damage when you
violate this instruction.
There might be serious injury or fatal accident when
you violate this instruction.
If the power supply cord or plug is damaged or
loosened, do not use.
Don’t’ install it in the area with moisture or outdoor
where it has rain or snow
• An electric shock or a fire may take place.
• An electric shock or a fire may take place.
Do not pull the cord off or touch it with moist hands.
• An electric shock or a fire may take place.
Please unplug the power supply cord when you do
not use it.
• An electric shock or a fire may take place.
Do not bend the power supply cord by force or
press it with heavy things.
• An electric shock or a fire may take place.
If there is dust or water on the power supply plug
and its connected part, please remove it completely.
• An electric shock or a fire may take place.
Do not install the washer nearby electric implement or
don’t put a candle light or cigarette light on the washer.
• A fire may take place.
Do not make your kids look into the inside of the
washer.
• If your kid falls into the washer, his life could be
Do not disassemble, repair or remodel it recklessly.
• When you need to repair it, please call service
agent. An electric shock or a fire may take place.
in danger.
Ventilate immediately without touching the power
plug if gas is leaking.
• An electric shock or a fire may take place if it
catches flame.
During operation, do not put your hands or metal
materials under the washer.
• You may be hurt by spinning board beneath
the washer.
If the washer makes strange noise, smell or smoke,
unplug it promptly and call service agent.
• An electric shock or a fire may take place.
Stay away from the washer when the bottom of the
washer sinks into the water.
• There might be an electric shock. Please
wait until the water drains out completely.
When cleaning, don’t spray water to the parts of the
washer directly.
• It may make it’s life span shorten.
Also an electric shock or fire may take place
Do not put laundry stained with gasoline, benzene,
or alcohol in the washer, and keep the materials
away from the washer.
Don’t use several appliances together with an outlet.
• A fire may take place due to unusual heat.
• An explosion or a fire may take place.
During spinning, don’t put your hand in the spinning tub.
• It may hurt your hands. If it does not stop within
15 seconds after you open the lid, call
service agent immediately.
Don’t press the button with an awl or pin.
• An electric shock or a fire may take place.
Use the new hose-sets and old hose-sets should
not be reused.
If the damage is found on the current cord in use, it
should be replaced by manufacturer, service cener
or authorized person in order to advoid the risk.
Connect the grounding wire to the shell plate, and
bury it under at least 25cm of earth:elternatively,
connect the ground wire to the appropriate pin on a
properly grounded power receptacle. Never connect
the wire to a telephone line, lightning rod, or gas
pipe.
2
DESCRIPTION OF PARTS
The User’s Manual is for common use.
Make use of the User’s Manual depending upon your washing machine model.
3
CONTROL PANEL
For more details, see control panel of your washing machine.
POWER BUTTON
POWER
Press this button once to operate.
Press once again to turn the power off.
START/
HOLD
START/HOLD BUTTON
Use to pause and restart the operation.
To change the washing procedure during operation, press this button to stop,
and once again to restart after changing the procedure.
DELAY
START
DELAY START BUTTON
Press this button when delay start washing is needed.
COURSE
COURSE SELECT BUTTON
With every press of this button, the washing course changes;
FUZZY(DIGITAL) ➔➔BLANKET ➔➔SUPER CLEAN ➔➔SPEEDY ➔➔WOOL
➔
FUZZY(DIGITAL)
SILVER WASH BUTTON
A course where silver water is supplied in washing as well as the last rinse,
SILVER
WASH
featuring sterilization and antibacterial coating.
•
This is available for all courses except the Wool course.
FUCTION
FUNCTION SELECT BUTTON
With every press of this button, the function changes:
SOAK&WASH&RINSE&SPIN ➔➔WASH ➔➔RINSE ➔➔SPIN ➔➔WASH&RINSE ➔➔RINSE&SPIN
➔
WASH&RINSE&SPIN ➔➔SOAK&WASH&RINSE&SPIN
WATER
LEVEL
WATER LEVEL SELECT BUTTON
According to the washload,select the water level ;
MEDIUM ➔➔HIGH ➔➔MAXIMUM ➔➔EXTRA LOW ➔➔LOW
REMAINING TIME INDICATOR LIGHT
The indicator light shows the remaining time (in minutes) of each wash cycle.
At the end of the cycle,the power automatically switches off.
4
WASHING PROCEDURE
Before starting washing, check the following;
Put the laundry into the washer and add detergent, too.
Be careful not to overload. Use right detergent
for the fabrics you are washing.
Connect the water supply hose to the water tap. Leave a tap
open. Plug the power cord in. Make sure to lay down the
drain hose. (In case no drain pump)
START/
HOLD
FUZZY(DIGITAL) COURSE
Selects the best washing course
SPEEDY COURSE
Because washing is speedy, it is
POWER
COURSE
START/
POWER
HOLD
automatically.
good for light or less stained laundry.
1. Press the power button to "ON".
2. Press the course select button three times.
3. Press the START/HOLD button
Water level is selected automatically.
Washing, rinsing, and spinning follow.
If you want to pause, press the START/HOLD
button again.You can change the course when paused.
4. Close the lid.
➔➔Select the Silver Wash button to perform anti-bacteria
washing.
1. Press the POWER Button to"ON".
2. Press the START/HOLD button.
Water level is selected automatically.
Washing,rinsing, and spinning follow.
If you want to pause, press the START/HOLD
button again.You can change the course when paused.
3. Close the lid.
➔➔Select the Silver Wash button to perform anti-bacteria
washing.
START/
HOLD
POWER
COURSE
BLANKET COURSE
START/
HOLD
POWER
COURSE
WOOL COURSE
1. Press the power button to "ON".
2. Press the course select button once.
3. Press the START/HOLD button
Water level is selected automatically.
Washing, rinsing, and spinning follow.
If you want to pause, press the START/HOLD
button again.You can change the course when paused.
4. Close the lid.
➔➔Select the Silver Wash button to perform anti-bacteria
washing.
1.Press the power button to "ON".
2.Press the course select four times.
3.Press the START/HOLD button.
Washing,rinsing, and spinning follow.
If you want to pause, press the START/HOLD
button again.You can change the course when paused.
4. Close the lid.
CAUTION . . .
-Do not use water above 30˚C for WOOL washing.
-Refer to the tag attached on the clothes for washing
information.
-Fasten buttons and turn inside out before washing.
-Use the detergent indicated in the laundry.
-When the degree of dirt is extreme, soak the laundry in warm
water for about 10 minutes before pressing the WOOL course
button in order to enhance washing efficiency.
➔➔In the Wool course, the Silver Wash course does not
work as it could damage the washed items.
START/
HOLD
SUPER CLEAN COURSE POWER
Use for cleaner washing.
1. Press the power button to "ON".
2. Press the course select button two times.
3. Press the START/HOLD button and put
the proper amount of detergent into tub.
Water level is selected automatically.
COURSE
Water level is only selected MAXIMUM ~ MEDIUM.
4. Close the lid.
The washing finishes by the time you reserved.
➔➔The tempering feature is included in the Super Clean
course. This is why the additional tempering course is
not selected.
➔➔Select the Silver Wash button to perform anti-bacteria
washing.
5
SAFETY INSTRUCTIONS
DELAY
START
START/
HOLD
COURSE
POWER
DELAY START
Select this course when
you have to go out or do something else.
1. Press the power button to "ON".
2. Press the course select button.
3. Press the DELAY START button once.
You may change the delay start time with
use the DEALY START button. (from 3 hours to 18 hours)
4. Press the START/HOLD button and put
the proper amount of detergent into tub.
5. Close the lid.
The washing finishes by the time you reserved.
SILVER
WASH
START/
HOLD
SILVER WASH BUTTON
A course where bacteria hidden
POWER
inside the laundry are removed before it is Silver Wash-coated
for avoiding the propagation of harmful germs.
1. Press the power button to "ON".
2. Press the SILVER WASH button.
3. Press the START/HOLD button.
4. Close the lid.
- This can only be selected when WASH, RINSE
and SPIN are all selected.
- When the Silver Wash course is selected, manual-
ly selecting the (function) keys is not allowed.
- This toggles On/Off each time the button is pressed.
- This is available as an option for all courses other than the
Wool course.
6
MANUAL FUNCTIONS
Each washing course changes manually.
Ex) If you want to wash in the speedy course : Power - Select speedy course - Wash - Start/Hold button
SOAK FUNCTION (Including WASH, RINSE, SPIN)
Press the POWER button.
Select the course(Press the course button).
➔➔FUZZY(DIGITAL), BLANKET, SUPER CLEAN, SPEEDY, WOOL
Press the FUNCTION SELECT button once.
Press the START/HOLD button once.
START/
HOLD
FUNCTION
POWER
COURSE
Water level is selected automatically.
once
Washing,rinsing, and spinning follow.
➔➔When the Silver Wash course is selected, the tempering feature is already
included in this course so manually selecting Tempering is not allowed.
WASH ONLY
Press the POWER button.
Press the FUNCTION SELECT button twice.
Press the START/HOLD button once.
START/
HOLD
POWER
FUNCTION
Washing goes on for 18 minutes.
When the FUNCTION button is pressed during washing, the wash
time can be changed to between 3 and 25 minutes in duration.
twice
RINSE ONLY
Press the FUNCTION button three times.
Press the START/HOLD button once.
Rinsing goes on for 15 minutes.
START/
HOLD
POWER
FUNCTION
When the FUNCTION button is pressed during rinsing, the rinse
times can be changed to between 1 to 5 times in duration.
three times
SPIN ONLY
Press the FUNCTION button four times.
Press the START/HOLD button once.
Spin drying goes on for 11 minutes.
When the FUNCTION button is pressed during spinning,
the spin time can be changed to from 1 to 7 minutes.
START/
HOLD
POWER
FUNCTION
four times
WASH AND RINSE
Press the FUNCTION button five times.
Press the START/HOLD button once.
START/
HOLD
POWER
FUNCTION
Washing and rinsing go on for 38 minutes.
When the FUNCTION button is pressed during working, the rinse
times can be changed to between 1 to 5 times in duration.
five times
RINSE AND SPIN
Press the FUNCTION button six times.
Press the START/HOLD button once.
START/
HOLD
POWER
FUNCTION
Rinsing and spin drying follow.
When the FUNCTION button is pressed during working, the rinse
times can be changed to between 1 and 5 times in duration.
six times
7
INSTALLATION & MAINTENANCE
The User’s Manual is for common use.
Make use of the User’s Manual depending upon your washing machine model.
ENVIRONMENT
Never install the washer near water.
Leave some space
Do not place the washer in steamy rooms or where the
washer is directly exposed to rain.Moisture may destroy the
electrical insulation causing an electrical shock hazard.
Avoid direct sunlight or heaters.
As plastic and electrical components are affected by direct
heat,never place the washer near furnaces, boilers, etc.
Do not place under direct sunlight.
Maintain at least 10cm between the washer and the wall.
Place the washer on a sturdy flat surface.
If the washer is placed on an uneven or weak surface,
noise or vibration occurs. (Allowable is 1˚)
Adjust the legs for even placement.
•
If the washer is not leveled with the ground, it makes the machine tremble more or be out of order.
So, make sure that the washer is leveled properly.
LEVELLING
SEE IF THE MACHINE IS PLACED LEVEL BY CHECKING
THE POSITION OF THE WASHING TUB.
1. Adjust the side horizontally
first and the front
•
Open the lid of the machine, pour water into the tub up to the level
just below the pulsator, and adjust the legs so that the pulsator is
positioned at the center of the water as shown in the figure.
in same direction ➔ next.
2. If the thread is not
within the limit, adjust
the height of
•
•
Place the machine more than
10cm away from the wall.
the legs.
Adjust the legs on feet
for levelling .
Loosen
Lock
CONNECTING THE WATER SUPPLY HOSE
1. Remove the adaptor
5. Connect the other end of the water
from the water supply hose.
supply hose to the inlet water valve
at the back of the washer.
Screw the hose clockwise all the
way in.
2. First,using a "+" type screw
driver, loosen the four screws
on the adaptor. Next,take the
adaptor and turn part(b) fol-
lowing the arrow for gap about
5mm between them.
5-1.Connect the other end of the water
supply hose to the inlet water valve
at the top of the washer.
a
b
Screw the hose clockwise all the way in.
3. Connect adaptor to the
water tap by tightening the
screws firmly. Then, turn
part (b) following the arrow
and put (a) and (b)together.
If the water tap is a screw type,assemble
a water supply hose that fits to the
tap as shown.
a
b
4. Connect the water supplyhose
to the adaptor. Pull down the
part (c) of the water supply
hose .When the part (c)is
released, the hose is automati-
cally connected to the adaptor
making a 'click' sound.
NOTICE After completing connection, if water leaks from the hose,
then repeat the same steps.
Use the most conventional type of faucet for water supply.
In case the faucet is square or too big,remove the spacing
ring before inserting the faucet into the adaptor.
c
Note : The appliance is to be connected to the water mains using new hose-sets and that old hose-sets should not be
used.
8
ASSEMBLING THE RAT PROTECTION PANEL
2.If you have difficulty
1.Insert the rat
protection panel
to the assembling
hole on front side
to the end.
inserting the panel
lift up the washer a
little and insert it
IN CASE OF PUMP-DRAINED WASHER
Take out the cap-hose and Be sure to join tightly the drain hose into
Be sure to join tightly the drain
hose into the drain-outlet
on the side of the machine.
Install the drain hose in the
position of about 90~100cm
above the ground.
connect the outlet-hose.
the drain-outlet on the back of the
machine.
outlet-hose
cap-hose
(a)
CONNECTING THE DRAIN HOSE
After pressing the joint ring(a), insert the drain hose(b)
to drain direction.
(b)
HOW TO PUT THE DETERGENT IN
1.Open the detergent box by pulling in the direction of the arrow as shown in the
figure and then put the powder detergent in the detergent box.
2. Put in one-time amount of detergent evenly so the detergent may not brim over the box.
Detergent Device
Put the detergent
in proportion to
water level
Softener Device
Softener
baseline
CAUTION : If softener is stored over the above base line, it may flow down at any time.
9
WATER SUPPLY CONNECTOR FILTER
inlet water
valve
1.Pull out the filter and wash well.
2. Pull in the filter and connect
the hose to the inlet water
valve tightly.
3. Check if there is a leakage.
Note to tighten up the
connector.
CLEANING THE FILTER NET Clean the filter net often to keep the washer clean.
1. Push the upper part
of the filter and pull in.
2. Open the cover as
shown in the figure.
3. Clean the filter.
4. Close the cover and insert the
lower part of the filter in the
basket first and then push the
filter with "click" sound .
HOW TO CLEAN THE FILTER
1. Place a rag under the washer filter not to wet the floor.
2. Rotate the filter counterclockwise
and pull out the filter.
3. Remove dirts and rotate
the filter clockwise
(pump drained washer)
1.Place a rag under washer filter not to wet the floor.
2.Turn the filter-cap to the left.
3.Take the filter out and
remove dirts.
open close
until it locks in position.
4. Reassemble in
reverse order.
10
TROUBLESHOOTING
Washing machine won't work
Is the water tap opened?
Is the washer plugged in?
Is the power cut off?
Spinning does not work
Is the laundry spread out evenly
in the washer?
Is the washer set on a sturdy
flat surface?
Is there enough water?
Water is not supplied
Is the water tap opened?
Is the water cut off?
Is the water supply hose or hose
connection clogged?
Water is overflowed
Restart after spinning.
If the error sign still indicates,
call agency.
Is the water tap frozen?
If water is not supplied in 1 hour,a
buzzer will sound, and the remaining
time indicator will show "4E".
Water dose not drain
Is the drain hose down?(No pump)
Is the drain hose frozen?
Is the drain hose clogged?
If the water dose not drain in 15
minutes, a buzzer will sound,
and the remaining time indicator
will show "5E".
11
IN CASE THE NEED FOR SERVICING ARISES.
If any problem occurs with your products,do not hestitate to call any nearby.
Name, address, telephone number is required.
SPECIFICATIONS
330W
55 l
49 l
43 l
MAXIMUM
HIGH
WASH
POWER
CONSUMPTION
246W
W573xD632xH908
33 kg
SPIN
MED
STANDARD
WATER LEVEL
DIMENSIONS(mm)
35 l
27 l
140
LOW
WEIGHT
EXTRA LOW
0.05~0.78 MPa
l
WATER PRESSURE
WASHING TYPE
WATER USAGE
2
.
(0.5 ~ 8.0 kg f/cm )
PULSATOR
ROTATING SPEED
Stirring Type
113 rpm
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care centre.
Country
Customer Care Center
1300 362 603
Web Site
AUSTRALIA
3030 8282
1600 1100 11
INDIA
1800-88-9999
MALAYSIA
PHILIPPINES
SINGAPORE
VIETNAM
1800-10-SAMSUNG
(7267864)
1800-SAMSUNG
(7267864)
1 800 588 889
8-800-200-0400
RUSSIA
0860 7267864
(SAMSUNG)
SOUTH AFRICA
|