Operating and installation instructions
Fridge freezer combination
with dynamic cooling
KF 7544 SND ed-3
To avoid the risk of accidents or
damage to the appliance it is
essential to read these operating instructions
G
before it is installed or used for the
first time.
M.-Nr. 05 910 950
Contents
Freezing and storing food. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Hints on home freezing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Packing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Before placing food in the freezer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Ice cubes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Defrosting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Freezer section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Problem solving guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
After Sales Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Electrical connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Aligning the appliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Changing the door hinging. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Building in the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Description of the appliance
aSuper cool button and indicator light
fFreezer section temperature display
bOn button to switch on the whole ap- gFreezer section
pliance or
On/Off button for independently
switching the
temperature selector buttons
(upper button: warmer, lower button:
colder)
refrigerator section on and off.
hMain switch for switching
cRefrigerator section
temperature selector buttons
(upper button: warmer, lower button:
colder)
the whole appliance on and off
iSuper freeze button
and indicator light
jAlarm button
dRefrigerator section temperature dis-
play
eSafety lock - indicator light
4
Description of the appliance
kSwitch for dynamic cooling
lFan for dynamic cooling
mButter and cheese compartment
nInterior lighting
oEgg trays
pBottle rack
qAdjustable shelves
rCondensate channel and
drain hole
sAdjustable door shelves
tFruit and vegetable containers
uDivider
vFreezer drawers with
freezer calendar
wMarker system for frozen food
5
Caring for the environment
Disposal of the packing
material
Disposal of your old appliance
Old appliances contain materials which
can be reclaimed or recycled. Please
contact your dealer, your waste collec-
tion centre or scrap merchant about
potential recycling schemes.
The transport and protective packing
has been selected from materials which
are environmentally friendly for disposal
and can normally be recycled.
Make sure that the pipework is not
damaged whilst moving an old appli-
ance. This is to ensure that the refriger-
ant and oil in the compressor cannot
leak into the environment. It is important
that they are disposed of in a safe
manner by authorised persons only.
Rather than just throwing these
materials away, please ensure they are
offered for recycling.
Ensure that any plastic wrappings,
bags etc. are disposed of safely and
kept out of the reach of babies and
young children. Danger of suffocation!
Ensure that the appliance presents no
danger to children while being stored
for disposal.
See the appropriate section in the
Warning and safety instructions.
6
Warning and Safety instructions
Technical safety
This appliance complies with all rele-
This appliance contains the coolant
Isobutane (R600a), a natural gas
which is very environment friendly. Al-
though it is flammable, it does not dam-
age the ozone layer and does not in-
crease the green house effect. The use
of this environment friendly coolant has,
however, led to a slight increase in the
noise level of the appliance. In addition
to the noise of the compressor, you
might be able to hear the coolant flow-
ing around the system. This is unavoid-
able, but does not have any adverse ef-
fect on the performance of the appli-
ance.
Care must be taken during transporta-
tion and setting up of the appliance that
no parts of the coolant system are dam-
aged. Leaking coolant can damage the
eyes.
In the event of any damage:
- avoid open fires
vant legal safety requirements. Inap-
propriate use can however lead to
personal injury and damage to prop-
erty.
Read the operating instructions
carefully before starting to use this
appliance. They contain important
notes on installation, safety, opera-
tion and care of the appliance. This
way you will avoid the risk of acci-
dents and damage to the appliance.
Keep these operating instructions in
a safe place and pass them on to
any future user.
Correct use
This appliance is intended for do-
mestic use only for the cool stor-
age of food and drink as well as for
storing deep frozen food, freezing fresh
food and for preparing ice. Any other
usage is not supported by the manu-
facturer and could be dangerous. The
manufacturer cannot be held liable for
damage caused by improper use of the
appliance.
and anything which creates a spark,
- disconnect from the mains,
- air the room in which the appliance is
located for several minutes and
- contact the Service Department
for advice.
The more refrigerant there is in an
appliance, the larger the room it
should be installed in. In the event of a
leakage, if the appliance is in a small
room, there is the danger of combusti-
ble gases building up.
For every 8 g of coolant at least 1 m3
room space is required. The amount of
coolant in the appliance is stated on the
data plate inside the appliance.
7
Warning and Safety instructions
Before connecting the appliance to
the mains supply make sure that
the rating on the data plate corre-
sponds to the voltage and frequency of sons to ensure safety.
Installation work, maintenance and
repairs may only be carried out by
suitably qualified and competent per-
the household supply. This data must
correspond in order to avoid risk of
damage to the appliance. Consult a
qualified electrician if in doubt.
Repairs and other work by unqualified
persons could be dangerous and the
manufacturer will not be held liable.
Ensure that current is not supplied
to the appliance while maintenance
The electrical safety of this appli-
ance can only be guaranteed when or repair work is being carried out.
continuity is complete between the ap-
The appliance is only completely
pliance and an effective earthing sys-
isolated from the electricity supply
tem, which complies with local and na-
when:
tional safety regulations. It is most im-
portant that this basic safety require-
ment is tested regularly and where
there is any doubt the household wiring
system should be inspected by a quali-
fied electrician. The manufacturer can-
not be held liable for the consequences
of an inadequate earthing system (e.g.
electric shock).
– the plug has been withdrawn. Do not
pull on the cable, only on the plug.
– the mains fuse is withdrawn, or
– the screw-out fuse is removed in
countries where this is applicable.
Do not connect the appliance to
the mains electricity supply by an
extension lead.
Extension leads do not guarantee the
required safety of the appliance (e.g.
danger of overheating).
Safe operation of the appliance is
only assured if it has been installed
and connected in accordance with
these operating and installation instruc-
tions.
Operation
This equipment is not designed for
maritime use or for use in mobile
installations such as caravans, aircraft
etc. However it may be suitable for
such usage subject to a risk assess-
ment of the installation being carried
out by a suitably qualified engineer.
Never handle frozen food with wet
hands. Your hands may freeze to
the frozen food. Danger of frost burn.
Do not take ice cubes out with your
bare hands and never place ice
cubes or ice lollies in your mouth
straight from the freezer.
The very low temperature of the frozen
ice or lollies can cause frost burn to the
lips and tongue.
8
Warning and Safety instructions
Do not refreeze thawed or partially
Do not use sharp edged objects to
– remove frost and ice,
thawed food. Defrosted food
should be used up as quickly as possi-
ble as food soon loses its nutritional
value and goes off. Defrosted food may
only be re-frozen after it has been
cooked.
– separate frozen foods and remove
ice trays.
They will damage the evaporator caus-
ing irreversible damage to the appli-
ance.
Do not store explosive materials in
the appliance or any products con-
taining propellants (e.g. spray cans).
Switching on thermostats may produce
sparks which could present a fire haz-
ard.
Never place electric heaters or
candles in the appliance to defrost
it. These can damage the plastic parts.
Do not use defrosting sprays, or
de-icers as they could contain sub-
stances which could damage the plas-
tic parts and which may cause the build
up of gases and pose a danger to
health.
If storing alcohol with a high per-
centage proof, make sure it is
tightly closed and stored upright.
Danger of explosion.
Do not store cans or bottles con-
taining carbonated drinks or liquids
which could freeze in the freezer. The
cans or bottles could explode.
Danger of injury and damage to the ap-
pliance.
Do not use any oils or grease on
the door seals as these will cause
the seals to deteriorate and become
porous with time.
Do not store cooking oil in the ap-
pliance door. Traces of oil can
cause stress cracks to occur in the
plastic components in the door.
When cooling drinks quickly in the
freezer make sure bottles are not
left in for more than one hour, otherwise
they could burst. Danger of injury and
damage to the appliance.
Do not block the ventilation gaps in
the appliance as this would impair
the efficiency of the appliance, increase
the electricity consumption and could
cause damage to the appliance.
Observe the "use by" dates given
on food to avoid the risk of food
poisoning.
Storage times will depend on several
factors including the freshness and
quality of the food as well as the tem-
perature at which it is stored. Follow the
instructions given on food manufac-
turer’s packaging on storage conditions
required as well as the "use by" date.
9
Warning and Safety instructions
The appliance is designed for a
use within certain climate ranges
(ambient temperatures). It must not be
used in ranges for which it is not de-
signed. The climate range for your ap-
pliance is stated on the data plate in-
side the appliance.
Installing it in a room with too low an
ambient temperature will lead to the ap-
pliance switching off for longer periods
so that it cannot maintain the required
temperature.
Disposal of your old appliance
Before disposing of an old appli-
ance first make the door latch or
lock unusable.
This way you will prevent children from
accidentally locking themselves in and
endangering their lives.
Before disposing of an old appli-
ance, unplug it and render the plug
useless. Cut off the cable directly be-
hind the appliance and at the plug to
prevent misuse.
Never use a steam-cleaning appli-
ance to defrost or clean this appli-
ance. Pressurised steam could reach
the electrical components and cause a
short circuit.
Be careful not to damage any part
of the pipework whilst awaiting dis-
posal, e.g. by
– puncturing the refrigerant channels
in the evaporator.
In countries where there are areas
which may be subject to infestation
by cockroaches or other vermin, pay
particular attention to keeping the appli-
ance and its surrounding in a clean
condition at all times. Any damage
which may caused by cockroaches or
vermin will not be covered by the appli-
ance guarantee.
– bending any pipework.
– scratching the surface coating.
Splashes of refrigerant can damage the
eyes.
The manufacturer cannot be held
liable for damage caused by
non-compliance with these Warning
and Safety instructions.
10
Switching on and off
Before using for the first time
Switching off
The stainless steel surface has a pro-
tective cover to prevent scratching dur-
ing transportation.
^ Press the main switch.
The temperature display goes out and
the cooling process is switched off. If
^ Do not remove this cover until the ap- this does not happen, then the safety
pliance has been installed or built in.
Start at one of the upper corners.
lock is still engaged.
To switch the refrigerator section off
separately
^ Clean the inside of the appliance and
the accessories with warm water and
a little washing up liquid and then dry
with a soft cloth.
The refrigerator section can be
switched off without having to switch off
the freezer section. This is useful e.g.
whilst on holiday.
Important: To ensure correct func-
tioning of the appliance, let it stand
for between ½ and 1 hour after
transporting it to its final location be-
fore connecting it to the mains.
Switching on
^ Press the On/Off button for the refrig-
erator section.
The refrigerator and freezer sections
are switched on together by pressing
the main switch or by pressing the on
button on the left hand side of the con-
trol panel.
The temperature display for the re-
frigerator section goes out and the
refrigerator section switches off.
^ Press the main switch.
Bars will light up in the temperature dis-
play and a buzzer will sound. The appli-
ance starts cooling.
Allow the appliance to run for a few
hours before placing food in it. This will
ensure that the temperature is suffi-
ciently low.
11
Switching on and off
To switch the refrigerator section
back on again
Engaging the safety lock
^ Press and hold the alarm button.
^ Then press the Super freeze button
as well and keep both buttons
pressed in for approx. 3 seconds un-
til the Safety lock indicator light d in
the temperature display lights up and
a beep sounds.
^ Press the On/Off button again.
The appliance can now not be switched
off until the lock is de-activated.
Bars will appear in the temperature
display for the refrigerator section.
The refrigerator section starts cool-
ing. The interior light will come on
when the door is opened.
De-activating the safety lock
^ Repeat the same procedure as for
engaging the lock given above.
The safety lock indicator light must go
out in the temperature display. The ap-
pliance can now be switched off at any
time.
Switching off the alarm
Switching off for longer
periods of time
^ Press the alarm button.
If the appliance is not going to be used
for a longer period of time, e.g. whilst
on holiday
The alarm stops. The bars will continue
flashing in the temperature display until
the temperature which has been set is
reached.
^ switch the appliance off at the mains,
^ withdraw the plug (pull on the plug
and not the cable),
Cool pack
^ clean the appliance out and
Place the cool pack in the top drawer or
to save space on the freezer tray. The
cool pack will be at its most effective af-
ter it has been in the freezer for approx.
24 hours.
^ leave the doors ajar to air the appli-
ance.
If, during a long absence, the appli-
ance is switched off but not cleaned
out and the doors are left shut there
is a danger of mould and odours
building up inside the appliance.
Safety lock
The safety lock can be engaged to pre-
vent the appliance being switched off
inadvertently.
12
The correct temperature
It is very important to set the correct
temperature for storing food in the ap-
pliance. Micro organisms will cause
food which is not stored at the correct
temperature to deteriorate rapidly. Tem-
perature influences the growth rate of
these micro organisms. Reducing the
temperature reduces their growth rate.
. . . in the freezer
For freezing fresh food and storing
frozen food for a long time a tempera-
ture of at least -18 °C is needed. At this
temperature the growth of micro organ-
isms is generally halted. As soon as the
temperature rises to above -10 °C, the
micro organisms become active in the
food again so that it cannot be kept as
long. For this reason, partially defrosted
or defrosted food must not be re-frozen.
Food may be re-frozen once it has
been cooked as the high temperatures
achieved when cooking destroy most
micro organisms.
The temperature in the appliance will
rise:
– the more often the door is opened
and the longer it is kept open,
– if too much food is stored in it at
once,
– the warmer the food is which is being
put into it,
Temperature selection
The temperatures for the refrigerator
section and for the freezer section are
set independently from one another us-
ing the buttons to the right and left
hand sides of the temperature displays.
– the higher the ambient temperature
surrounding the appliance.
The appliance is designed for use in
specific ambient temperatures (cli-
mate ranges). Do not use in ambient
temperatures for which it is not de-
signed.
Press the
. . . in the refrigerator
We recommend a temperature of 5 °C
in middle of the refrigerator section.
Upper button: to raise the temperature
(it gets warmer)
Lower button: to reduce the tempera-
ture (it gets colder)
The temperature being set will flash in
the display.
13
The correct temperature
When pressing the buttons the follow-
ing are shown in the display:
Temperature range
The temperature can be adjusted:
– When first pressed: The last
– in the refrigerator section from 2 °C
to 11 °C
temperature selected flashes.
– Each subsequent press of the but-
– in the freezer section from -16 °C to
-26 °C
ton:
adjusts the temperature shown in
1 °C steps.
The ambient temperature in the room
and the installation location can affect
the time it takes for the appliance to
reach the lowest temperture. If the am-
bient temperature is too high, the appli-
ance may not reach the lowest temper-
– Keeping the button pressed in: ad-
justs the temperature continually.
Approx. 5 seconds after letting go of
the button the current actual tempera-
ture of the refrigerator or freezer is auto- ature.
matically shown.
Temperature displays
If you have adjusted the temperature,
wait for approx. 6 hours if the appli-
ance is not very full and for approx.
24 hours if the appliance is full before
checking the temperature display as it
will take this long for the display to
show the accurate temperature of the
appliance. If, after this time, the temper-
ature is too high or too low, you will
need to adjust it again.
During normal operation the tempera-
ture display shows the temperature in
the middle of the refrigerator section
and the temperature in the warmest
part of the freezer section.
If the temperature in the appliance is
not within the range that the appliance
is able to display (i.e. if it is not between
0 °C and 19 °C in the refrigerator sec-
tion, and if the temperature in the
freezer section is above 0 °C), only a
bar will light up in the temperature dis-
plays.
It will take between 3 and 8 hours ap-
proximately for the appliance to reach
the required temperature. The time it
takes will depend on where the appli-
ance is located and the temperature
setting selected.
14
The correct temperature
The temperature displays flash, if
Temperature display brightness
– a different temperature is being set,
The appliance is supplied with the
brightness of the temperature display
set as low as possible. However, if the
door is opened, a setting changed or if
the alarm is sounding, the temperature
display will appear much brighter for
approx. 1 minute.
– the temperature in the appliance has
risen by several degrees, indicating
that the appliance is warming up too
much.
This loss of coldness is no cause for
concern in the following circumstances:
The level of brightness can be adjusted
– when the door has been left open for to be:
a while, e.g. for removing or storing a
– Brighter: by pressing the alarm but-
large amount of food,
ton, and whilst holding it in, press the
upper button next to the temperature
display for the freezer section.
– when fresh food is being frozen.
However, if the temperature remains
above -18 °C for a long time, check that – Dimmer: by pressing the alarm but-
the frozen food has not started to de-
frost. Do not refreeze thawed or de-
frosted food! If it has started thawing,
check that the food is safe to use and if
it is, use it as soon as possible.
ton, and whilst holding it in, press the
lower button next to the temperature
display for the freezer section.
15
Alarm
Your appliance has been fitted with a
warning system which ensures that the
temperature in the freezer cannot rise
unnoticed and to avoid energy being
wasted if the door is left open. The
alarm system is always active. You can-
not disable it.
Switching the alarm tone off
early
Once the set temperature has been
reached in the freezer section, the
alarm tone stops and the temperature is
displayed constantly. However, if the
noise disturbs you, you can turn the
alarm tone off before this if you wish.
Temperature alarm
If the temperature in the freezer gets
too warm an alarm will sound and the
temperature display will flash. The tem-
perature the appliance is set at deter-
mines the temperature the appliance
recognises as being too warm.
^ Press the alarm button. The alarm
stops. The temperature display con-
tinues to flash until the set tempera-
ture has been reached. It then lights
up constantly.
The alarm will sound and the tempera-
ture display will flash:
– when the freezer is switched on.
– when the freezer section door has
been left open for a while, e.g. in or-
der to load, re-arrange or take food
out of the freezer.
– when freezing large amounts of food.
– when there has been a lengthy inter-
ruption to the power supply.
Door alarm
If the door has been left open for
approx. 60 seconds the alarm will
sound.
16
Super cool, super freeze and dynamic cooling
Super cool
Freezing fresh food
The super cool function can be used to Fresh food should be frozen as quickly
rapidly reduce the temperature in the
refrigerator section to its lowest setting.
as possible. This way the nutritional
value of the food, its vitamin content,
appearance and taste are not impaired.
Switching on super cool
Food which takes a long time to freeze
will lose more water from its cells which
then shrink.
During the defrosting process only
some of this water is reabsorbed by the
cells. The rest collects around the food.
Super cool is particularly recom-
mended for faster chilling of large
amounts of fresh food or drink.
In practice this means that the food
loses a large degree of its moisture.
If food is frozen quickly the cells have
less time to lose moisture so they shrink
less. As there is not so much moisture,
it is easier for the food to reabsorb it
during the defrosting process.
^ Press the super cool button, the
super cool indicator light will come
on.
The appliance works at full power to
lower the temperature in the refrigera-
tor section.
Switching off super cool
The super cool function switches itself
off automatically after approx. 6 hours.
The indicator light goes out and the ap-
pliance continues running at normal
power.
To save energy the super cool function
can be switched off once food and
drinks are sufficiently chilled.
^ Press the super cool button. The
super cool indicator light will go out.
The appliance continues running at
normal power.
17
Super cool, super freeze and dynamic cooling
Super freeze
Dynamic cooling
Switch the super freeze function on be- With dynamic cooling the temperature
fore putting fresh food into the freezer.
inside the refrigerator section is distrib-
uted to all areas more evenly. All food
stored in the refrigerator section will be
chilled to about the same degree. The
temperature is controlled as normal
with the temperature buttons.
Exceptions:
– when putting in frozen food.
– when freezing up to 2 kg fresh food
daily.
Dynamic cooling should be selected
when:
Switching on super freeze
– the ambient temperature in the room
is high (above approx. 30 °C) and
When freezing small quantities of food
in the freezer, the super freeze function
should be switched on 4 – 6 hours be-
forehand. When freezing the maxi-
mum load of food the super freeze
function should be switched on 24
hours beforehand.
– the room humidity level is high.
Switching on dynamic cooling
^ Press the switch for dynamic cooling
above the fan to m.
The fan will start turning.
To save energy, the fan will switch itself
off when the refrigerator section door is
opened.
^ Press the super freeze button, the
super freeze indicator light will come
on.
Switching off dynamic cooling
When dynamic cooling is switched on
the appliance uses more energy. It
should therefore be switched off when
the room temperature is normal (below
30 °C) and when humidity levels are
normal.
The appliance works at full power to
lower the temperature in the freezer
section.
^ Press the switch for dynamic cooling
Switching super freeze off
to "0".
Depending on the amount of food
placed in the freezer the super freeze
function will switch off automatically af-
ter approx. 30 to 60 hours. The super
freeze indicator light will go out and the
appliance will continue running at nor-
mal power.
The fan will stop after a short while.
18
Using the refrigerator section efficiently
Different storage zones
Do not store explosive materials in
the appliance or any products con-
taining combustible gas (e.g. spray
cans). Danger of explosion.
Natural air circulation gives rise to dif-
ferent temperature zones inside the re-
frigerator section. Cold, heavy air sinks
to the lowest section of the appliance.
Make use of the different zones when
placing food in the appliance.
If storing alcohol with a high per-
centage proof, make sure it is tightly
closed, and store upright.
Coldest zone
The coldest zone in the refrigerator sec-
tion is directly above the vegetable
containers.
Do not store cooking oil in the refrig-
erator door.
Traces of oil can cause stress
cracks to occur in the plastic com-
ponents in the door.
Use this for all delicate and highly per-
ishable food, e.g.
– fish, meat, poultry,
Food must not touch the back wall of
the appliance. Otherwise it may
freeze to the back wall.
– sausage products, ready meals,
– dishes or baked goods containing
eggs or cream
Food which should not be
stored in a refrigerator
– fresh dough, cake mixtures, pizza or
quiche dough,
Not all food is suitable for refrigeration.
These include:
– soft cheese and other dairy prod-
ucts,
– Fruit and vegetables which are sensi-
tive to cold, such as bananas, avo-
cado pears, papaya, passion fruit,
aubergines, peppers, tomatoes and
cucumbers
– pre-packed vegetables and other
fresh food with a label stating it
should be kept at a minimum temper-
ature of 4 °C.
– Fruit which is not yet ripe
– Potatoes
Warmest zone
The warmest zone is in the top section
of the refrigerator door. Use this for stor- – Some hard cheeses
ing butter and cheese.
19
Using the refrigerator section efficiently
Storing food correctly
Energy saving tips
Store food covered or packaged. This
will prevent food smells or tastes from
affecting other foods and prevent food
from drying out. The growth of bacteria,
such as salmonella, can be avoided by
setting the correct temperature and
maintaining good standards of hygiene.
– Frequently opening the door or keep-
ing it open for too long will cause the
temperature in the appliance to rise.
The appliance will have to run more
often in order to maintain the cool
temperature inside the appliance.
Only open the door when you need
to and then only for as long as nec-
essary.
Fruit and vegetables
Fruit and vegetables can be stored
loose in the vegetable containers. How-
ever, you should bear in mind that
some types of vegetables give off a
natural gas which speeds up the rate at
which food perishes. Some fruit and
vegetables react stongly to this gas
and should not be stored together in
the vegetable containers.
– If you organise where you store your
food correctly you should be able to
find things quickly and easily without
allowing the temperature in the appli-
ance to rise. Sort the food out care-
fully before putting it into the appli-
ance.
– Hot food and drinks must be cooled
to room temperature before placing
them in the appliance.
Examples of fruit which produce a
large amount of this natural gas are:
– Do not store groceries too close to
each other. Space should be left be-
tween individual items for air to circu-
late.
Apples, apricots, pears, nectarines,
peaches, plums, avocado pears and
figs.
Examples of fruit and vegetables
which react strongly to the natural
gases given off by other types of fruit
and vegetables are:
Kiwis, broccoli, cauliflower, brussels
sprouts, mangos, honeydew melons,
apples, apricots, cucumbers, tomatoes,
pears, nectarines and peaches.
20
Adjusting the interior fittings
Moving the shelves
Adjusting the door shelves
The shelves can be adjusted according ^ Push the door shelf upwards then re-
to the height of the food.
move it by pulling it forwards.
^ Pull the shelves forward as far as
they will go then lift them upwards to
remove them.
^ Replace the door shelf at the re-
quired position. Ensure that it is se-
curely pushed back into position.
^ With the rear barrier facing upwards
place the shelf at the required posi-
tion.
The rear barrier must face upwards to
prevent food from touching the back
of the appliance and freezing to it.
Moving the bottle divider
The bottle divider can be moved to the
left or right to ensure that bottles are
held securely in position when the door
is opened and shut.
Split shelf
(depending on model)
In order to accommodate tall items in
the appliance one of the shelves is di-
vided. The front section can be pushed
under the rear section.
^ Pull the front half of the glass shelf
forwards slightly and then push it
carefully under the rear half.
21
Freezing and storing food
Maximum freezing capacity
Home freezing
To ensure that fresh food placed in the
freezer freezes through to the core as
quickly as possible, the maximum
freezing capacity must not be ex-
ceeded. The maximum freezing capac-
ity for freezing within a 24 hour period is
given on the data plate “Freezing ca-
pacity ....kg/24 hrs”.
Only freeze fresh food which is in a
good condition.
Hints on home freezing
– The following types of food are suit-
able for freezing:
Fresh meat, poultry, game, fish, veg-
etables, herbs, fresh fruit, dairy prod-
ucts, pastry, leftovers, egg yolks, egg
whites and a range of pre-cooked
meals.
Storing frozen food
When buying frozen food to store in
your freezer check
– The following types of food are not
suitable for freezing:
– that the packaging is not damaged,
– the use by date,
Grapes, lettuces, radishes, sour
cream, mayonnaise, eggs in their
shells, onions, whole raw apples and
pears.
– the temperature at which the frozen
food is being stored in the shop. The
length of time it can be kept is re-
duced if it has been stored at a
temperaure warmer than -18 °C.
– To retain colour, taste and vitamin C,
vegetables should be blanched after
they have been trimmed and
washed. To blanch: bring a large
saucepan of water to the boil, im-
merse the vegetables in the fast boil-
ing water for 2-3 minutes, depending
on variety. Remove and cool quickly
in cold water. Drain and pack ready
for freezing.
^ Buy frozen food once you have fin-
ished the rest of your shopping and
wrap it in newspaper or use a cool
bag or box to transport it.
^ Store it in the freezer as soon as pos-
sible.
– Lean meat freezes better than fatty
meat and can be stored for consider-
ably longer.
Never re-freeze partially or fully de-
frosted food. Consume defrosted
food as soon as possible as it will
lose its nutritional value and spoil if
left for too long. Defrosted food may
only be re-frozen after it has been
cooked.
– To prevent chops, steaks, cutlets or
rolled meat from freezing together in
solid blocks when packed, separate
with a sheet of plastic freezer film.
22
Freezing and storing food
– Do not season fresh foods or
blanched vegetables before freez-
ing. Only season cooked food lightly
before freezing but care should be
taken as the taste of some spices al-
ters when frozen.
^ Make a note of the contents and the
date of freezing on the packaging.
Before placing food in the freezer
^ When freezing more than 2 kg of
fresh food, switch on the super freeze
function for some time before placing
the food in the freezer (see "Super
freeze").
– Do not place hot foods or drinks in
the freezer. This causes already
frozen food to thaw and increases
the energy consumption consider-
ably. Allow hot foods and drinks to
cool down before placing them in the
freezer.
Placing food in the freezer
Food to be frozen can be placed any-
where in the freezer.
Packing
Each drawer and separator plate
can be loaded with a maximum of
25 kg.
^ Freeze food in portions.
Suitable packing material
- plastic freezer film
- freezer bags
- aluminium foil
- freezer containers
When freezing large items e.g. a turkey
or a large joint of meat, the separator
plate in between two of the freezer
drawers can be removed to give more
room. This way food can be stored in
the space of two drawers.
Unsuitable packing material
- wrapping paper
- grease-proof paper
- cellophane
The bottom freezer drawer must not
be taken out of the appliance.
After removing the top drawer make
sure that you do not block the venti-
lation slits in the back wall of the ap-
pliance. They are important for trou-
ble-free operation of the appliance.
- bin bags
- plastic carrier bags
^ Expel as much air as possible from
bags etc. before sealing them to pre-
vent freezer burn on food.
^ Remove the drawers above and be-
low the separator plate.
^ Close the packaging tightly with
- rubber bands
- plastic clips
- string or bag ties
- freezer tape.
Freezer bags may also be sealed us-
ing home heat sealing kits.
23
Freezing and storing food
Freezer calendar
The freezer calendar on the freezer
drawer gives the length of time which
various foods can be stored for effec-
tively.
Where the storage time given on the
packaging differs, follow the advice on
the packaging.
Marker system for frozen food
^ Press down on the hook a under-
neath the rear of the separator plate
and pull the plate forwards and out
b.
Markers serve as a reminder of how
long food has been stored.
Each freezer drawer has two slide
markers with dials. The months are rep-
resented on the dials as 1 – 12.
To put the separator plate back in push
it back into place making sure it audibly
clicks into position.
^ Place the food flat in the bottom of
the drawers so that it freezes through
to the core as quickly as possible.
^ Always freeze similar types of food
together to save time and energy
when taking food out of the freezer.
^ Make sure that the packaging and
containers are dry to prevent them
sticking together when frozen.
^ Slide the markers onto the guide run-
ners on the edge of the drawers.
When freezing, make sure that food
already frozen does not come into
contact with fresh food being frozen
as this could cause the frozen food
to begin to defrost.
Use the markers to indicate the type of
food being frozen and turn the dials to
the appropriate number to indicate the
month the food was first placed in the
freezer.
24
Freezing and storing food
Defrosting
Ice cubes
Frozen food can be defrosted in differ-
ent ways:
– in the microwave oven,
– in the oven using the “Fan” or “De-
frost” setting,
– at room temperature,
– in the fridge.
^ Press down the release button on the
ice cube tray and fill the tray with wa-
ter. Any excess will flow out through
the outlet.
Poultry It is particularly important to
observe food hygiene rules when de-
frosting poultry. Do not use the liquid
from defrosted poultry. Pour it away and
wash the container it was in, the sink
and your hands.
^ Now pull the release button up to
seal the ice cube tray. Place the tray
in the bottom of the freezer section.
^ Once frozen, use a blunt instrument,
for example a spoon handle, to re-
move the ice tray from the freezer.
Fruit should be defrosted at room tem-
perature in its packing or in a covered
bowl.
^ Ice cubes can be removed easily
from the tray by holding it under cold
running water for a short while.
Most vegetables can be cooked while
still frozen. Just put straight into boiling
water or hot fat. The cooking time is
slightly less than that of fresh vegeta-
bles.
Cooling drinks
Drinks are best cooled quickly in the re-
frigerator section using the Super cool
function. If bottles have been placed in
the freezer for rapid cooling, make sure
they are not left in the freezer for more
than one hour, as they could burst.
Never re-freeze partially or fully de-
frosted food. Consume defrosted
food as soon as possible as it will
lose its nutritional value and spoil if
left for too long. Defrosted food may
only be re-frozen after it has been
cooked.
25
Freezing and storing food
Freezer tray
Cool pack
The freezer tray is useful for freezing
The cool pack prevents the tempera-
small items such as berries and vegeta- ture in the freezer rising too quickly in
bles. They can be frozen individually
and therefore maintain their shape
when defrosted.
the event of a power cut.
Place the cool pack in the upper
drawer directly on top of food or to save
space on the freezer tray. The cool
pack will be at its most effective after it
has been in the freezer for approx. 24
hours.
If there is a power cut place the cool
pack directly on top of the frozen food
in the upper drawer so that the food will
be kept cold for as long as possible.
^ Space the food out loosely on the
tray.
When placing fresh food in the freezer,
use the cool pack to separate the fresh
food from the food which is already
frozen so that the frozen food does not
begin to thaw.
^ Hang the tray in one of the upper
freezer drawers.
Leave food for 10 - 12 hours to freeze
thoroughly on the tray. Transfer it to a
freezer bag or suitable container once
frozen. Place the bag or container in
the freezer drawer.
The cool pack can also be used in a
cool bag to keep food or drinks cool for
a short period of time.
26
Defrosting
Refrigerator section
Freezer section
Condensate and frost can build up on
the back wall of the refrigerator section
whilst it is in use. These are automati-
cally removed and defrosted by the ap-
pliance.
This freezer is equipped with a
"No-frost" system. The freezer section
defrosts automatically.
The moisture generated by defrosting
collects in the condensor and is auto-
matically dissipated by the condensor
The condensate is drained away via a
channel and drain hole into an evapora- from time to time.
tion system at the back of the appli-
This enables the freezer section to re-
ance.
main permanently ice-free while the
food remains frozen. This system will
not cause food stored in the freezer to
defrost!
Ensure that the condensate channel
and drain hole are kept clean and
are never blocked so that conden-
sate can flow away without hin-
drance.
27
Cleaning and care
Cleaning the outer casing, the
interior and accessories
Never use cleaning agents contain-
ing abrasive substances such as
sand, soda, acids or chemical sol-
vents.
"Non-abrasive" cleaning agents are
also unsuitable as they can cause
matt areas to appear.
^ Clean the refrigerator section at least
once a month and the freezer section
at regular intervals.
^ Accessories and shelves should all
be hand washed. The butter dish is,
however, dishwasher safe.
For stainless steel surfaces, use a
proprietary stainless steel cleaning
agent.
^ Clean the condensate channel and
drain hole frequently, so that conden-
sate can drain away unhindered. Use
a straw or similar to clear the drain if
necessary.
Make sure that no water can pene-
trate into the electronic unit or into
the light.
^ Clean stainless steel surfaces with a
suitable cleaning agent.
Do not let water get into the drain-
age channel and drain hole when
cleaning.
^ After cleaning, wipe the outer casing,
the interior and accessories with a
damp cloth and dry with a soft cloth.
Leave the doors open to air the appli-
ance for a short while.
Never use steam cleaning appara-
tus to defrost or clean the appliance.
Pressurised steam could reach the
electrical components and cause a
short circuit.
E-Cloth
A microfibre "E-Cloth" is available from
the Miele UK Spare Parts Department,
Part Number 98013530, which is suit-
able for cleaning surfaces such as
stainless steel, glass, plastic and
chrome without the use of chemicals. It
can be washed 300 times.
The data plate located inside the ap-
pliance must not be removed. It
contains information which is re-
quired in the event of a service call.
Before cleaning
If you are unsure about a particular
product or need further advice
please contact your nearest Miele
Sales office. See back page for ad-
dress.
^ Switch the appliance off by pressing
the On-Off switch.
^ Take any food out of the appliance
and store it in a cool place.
^ Take out any removable parts e.g.
shelves for cleaning.
28
Cleaning and care
Ventilation gaps
After cleaning
^ The ventilation gaps should be
cleaned on a regular basis with a
brush or vacuum cleaner. A build up
of dust will increase the appliances
energy consumption.
^ Replace all shelves and accessories
in the refrigerator section.
^ Place food back in the refrigerator
section, close the appliance doors,
and switch the refrigerator section
and the freezer section on.
Door seals
^ Switch on the super freeze function
so that the freezer section can cool
down quickly. The super freeze indi-
cator light will come on.
Do not use any grease or oil on the
door seals as these will cause the
seals to deteriorate and become po-
rous over time.
^ Once the temperature in the freezer
has reached the required tempera-
ture place the food back in the
freezer drawers and place them back
in the freezer.
The door seals should be cleaned reg-
ularly with clean water and then wiped
dry with a soft cloth.
^ Switch off the super freeze function
with the super freeze button. The in-
dicator light will go out.
Metal grille at the back of the
appliance
The metal grille at the back of the appli-
ance (heat exchanger) should be
dusted at least once a year. A build up
of dust will increase the energy con-
sumption of the appliance.
When cleaning the grille, make sure
that the pipework and other compo-
nents do not get broken or damaged
in any way.
29
Problem solving guide
Remember that the noise of the com-
pressor and the coolant circulating in
the system is unavoidable.
Repairs to electrical appliances
should only be carried out by a suit-
ably qualified and competent person
in accordance with local and na-
tional safety regulations. Repairs
and other work by unqualified per-
sons could be dangerous. The man-
ufacturer cannot be held responsible
for unauthorised work.
. . . the appliance does not get cool.
^ Check whether the respective section
is switched on. The relevant tempera-
ture display must be lit up.
^ Check that the plug is correctly in-
serted in the socket.
The following faults can be corrected
without contacting the Miele Service
Department:
^ Check that the fuse is not defective
and that the mains fuse has not
blown. If it has, consult the Service
department.
What to do if ...
. . . the door to the freezer section will
not open because it has been opened
and closed too many times in suc-
cession.
. . . strange noises can be heard after
switching on the appliance, espe-
cially after it has just been installed.
^ Check to see whether any pieces of
furniture next to the appliance are vi-
brating whilst the appliance is in op-
eration.
This is not a fault. The suction caused
by opening and closing the door is pre-
venting the door from opening. Wait a
few minutes and then try again. It
should now open without force.
Switch the appliance off then:
^ Check whether the appliance is
aligned correctly.
. . . the temperature in the refrigerator
section or freezer section is too low.
^ Check whether all parts at the rear of
the appliance are free from hin-
drance. Remove any hindrance.
^ Select a warmer temperature.
^ The super freeze or super cool func-
tion has not been switched off. The
respective indicator light is still on.
^ Check whether the cable clips were
unclipped from the back of the appli-
ance before installation. They could
vibrate when the appliance is operat-
ing.
^ Are all removable parts securely lo-
cated in the appliance?
^ Are any bottles or containers unsta-
ble or knocking against each other?
30
Problem solving guide
. . . the appliance is switching in too
frequently and for too long.
. . . a bar is lit up or flashing in the
temperature displays.
^ Check whether ventilation gaps have Check the temperature displays about
been covered over or become too
dusty.
6 hours after switching on the appli-
ance. The display will not show a tem-
perature until the temperature in the ap-
pliance has reached a certain level.
^ Check whether, the metal grille (heat
exchanger) at the rear of the appli-
ance has become too dusty.
. . . the following messages show in
^ The door has been opened too fre-
quently, or a large amount of fresh
food has been put in at once for
freezing.
the temperature display "F0" to "F5".
There is a fault. Call the Miele Service
Department.
^ Check that the doors have been
properly closed.
. . . the following message appears in
the temperature display: "nA" .
The freezer section temperature has
risen too high at some point during the
last couple of days because of a power
cut.
. . . food has frozen together.
Use a blunt instrument, e.g. a spoon
handle or plastic scraper to carefully
prise it apart.
^ Press the alarm button whilst "nA"
shows in the display.
. . . the alarm sounds and the freezer
section temperature display flashes.
The temperature display will show the
warmest temperature recorded in the
freezer section during the power cut.
^ Has the freezer section door been
open for longer than 60 seconds?
The temperature has risen above the
temperature set because
Depending on the temperature dis-
played you should check the condition
of food in the freezer. If it has defrosted
or started to defrost check that it is still
safe to use and if so use it as soon as
possible. Defrosted food may only be
re-frozen after it has been cooked.
^ the freezer section door has been
opened too frequently, or large
amounts of fresh food have been put
in at once for freezing.
^ the ventilation gaps are blocked.
The warmest temperature will show in
the display for about 1 minute. The ac-
tual current temperature in the freezer
section will then show in the display
again.
^ there has been a lengthy interruption
to the power supply.
Once the problem has been resolved
the temperature display for the freezer
will light up constantly and the alarm
will go off.
31
Problem solving guide
. . . the super freeze or super cool in-
dicator light is not lit up although the
appliance is working.
^ Unscrew the bulb and replace it with
a new one.
Bulb specification:
220 – 240 V, max. 25 W, E 14 fitting
The indicator light is defective. Call the
Miele Service Department.
. . . the appliance will not switch off or
the temperature cannot be adjusted.
The safety lock has been activated.
. . . the interior light in the refrigerator
section is not working.
^ Was the refrigerator section door left
open for too long? The lighting
switches itself off automatically after
approx. 15 minutes.
^ Screw the new bulb into the connec-
tion. Ensure it goes in correctly.
^ Replace the cover by clipping it in at
the rear and then pressing it in at the
sides.
If this is not the case, then the bulb is
defective:
^ Disconnect the appliance from the
mains. Switch off at the wall and with-
draw the plug from the socket (pull
by the plug not the cable), or discon-
nect the mains fuse or remove the
screw-out fuse in countries where this
is applicable.
. . . the floor of the refrigerator sec-
tion is wet.
The drain hole is blocked.
^ Clean the condensate channel and
drain hole.
If you still cannot remedy the fault
having followed these suggestions,
then contact the Miele Service De-
partment.
To prevent unecessary loss of tem-
perature it is advisable not to open
the doors while waiting for the appli-
ance to be serviced.
^ Press the sides of the lamp cover in-
wards, disengage the cover and
unclip it at the rear.
32
After Sales Service
In the event of a fault which you cannot
correct yourself, or if the appliance is
under guarantee please contact:
– Your Miele Dealer
or
– The Miele Service Department
(see back cover for address).
When contacting the Service Depart-
ment, please quote the model and se-
rial number of your appliance, both of
which are shown on the data plate.
Please note that telephone calls may
be monitored and recorded to im-
prove our service.
33
Electrical connection
Electrical connection U.K.
Important
The appliance is supplied with a mains
cable and moulded plug ready for
connection to an a.c. single phase
220 – 240 V 50 Hz supply.
The wires in the mains lead are col-
oured in accordance with the following
code:
Green/yellow = earth
The fuse rating is 13 amps.
Blue
Brown
= neutral
= live
All electrical work should be carried
out by a suitably qualified and com-
petent person in accordance with lo-
cal and national safety regulations.
Connection should be made via a
fused plug and suitable switched
socket which is easily accessible.
For extra safety it is advisable to in-
stall a residual current device (RCD)
with a trip current of 30 mA (in
As the colours of the wires in the mains
lead of this appliance may not corre-
spond with the coloured markings
identifying the terminals in your plug,
proceed as follows:
The wire which is coloured green and
yellow must be connected to the termi-
nal in the plug which is marked with the
letter E or by the earth symbol (z) or
coloured green or green and yellow.
accordance with DIN VDE 0664,
VDE 0100, Section 739).
The wire which is coloured blue must
be connected to the terminal which is
marked with the letter N or coloured
black.
Do not connect the appliance to the
mains electricity supply by an extension
lead. Extension leads do not guarantee
the required safety of the appliance
(e.g. danger of overheating).
The wire which is coloured brown must
be connected to the terminal which is
marked with the letter L or coloured red.
The appliance must not be connected
to an inverter and must not be used
with a plug adapter as these can cause
damage to the appliance’s electronic
unit.
WARNING
THIS APPLIANCE MUST BE
EARTHED
34
Electrical connection
Non-rewireable plugs (BS 1363)
If this machine is fitted with a
non-rewireable plug, the following
information applies:
If the socket outlets are not suitable for
the plug supplied with this product, it
must be cut off and an appropriate plug
fitted.
The fuse carrier and the fuse should be
removed from the old plug and dis-
posed of. The old plug should then be
disposed of and on no account be in-
serted into any socket elsewhere in the
house (electric shock hazard).
The fuse cover must be re-fitted when
changing the fuse, and if the fuse cover
is lost, the plug must not be used until a
suitable replacement is obtained. The
colour of the correct replacement cover
is that of the coloured insert in the base
of the plug, or the colour that is em-
bossed in words in the base of the plug
(as applicable to the design of the plug
fitted).
The correct fuse rating of the replace-
ment fuses that are ASTA approved to
BS 1362 should be fitted. Replacement
fuse covers may be purchased from
your local electrical supplier, or Miele
Service agent.
35
Installation
off for too long causing the internal tem-
perature in the appliance to rise with
the risk of food deteriorating and going
off.
Appliances without side wall heating
must not be installed "side-by-side"
next to another refrigerator or
freezer.
Ventilation
Location
Air at the rear of the appliance gets
warm. To ensure sufficient ventilation
the ventilation gaps must not be cov-
ered over. The air inlet and outlet must
not be covered or blocked in any way.
They should be dusted on a regular
basis.
It should not be installed where it is ex-
posed to direct sunlight or directly adja-
cent to a heat-producing appliance
such as an oven or a radiator. The ap-
pliance should be installed in a dry well
ventilated room.
The room temperature should not go
above or below the climate range for
which the appliance is designed. The
higher the ambient temperature of the
room the more energy the appliance re-
quires to operate.
Fitting the handles
If the door hinging does not require
changing the handles should now be
fitted to the appliance doors.
Do not place any appliance which
gives off heat, such as a toaster or
microwave oven on top of this appli-
ance, as this would increase the ap-
pliance’s energy consumption.
Climate range
The appliance is designed for a use
within certain climate ranges (ambient
temperatures) and should not be used
outside this range. The climate range of
this appliance is stated on the data
plate inside the appliance.
Climate range
Ambient room tempera-
ture
^ Secure handle a to the holes in the
door using the screws marked b.
SN
N
ST
T
+10 °C to +32 °C
+16 °C to +32 °C
+18 °C to +38 °C
+18 °C to +43 °C
Operating in a room which is too cold
will cause the cooling system to switch
36
Installation
Installation
Aligning the appliance
^ Remove any cable clips from the rear
of the appliance.
^ Check that all parts at the rear of the
appliance are unhindered. Remove
any hindrance.
^ Carefully push the appliance into po-
sition. The rear of the appliance can
be placed directly against a wall.
^ To align the appliance adjust the feet
using the spanner supplied.
37
Changing the door hinging
The appliance is supplied right hand
hinged. If left hand door hinging is re-
quired follow the instructions below.
Re-fit all parts on the opposite side
^ Open the lower appliance door.
^ Remove the cover plate a.
^ Unscrew bearing block b and place
it on the other side (see illustration).
^ Use a screwdriver to lever the plinth
fascia a out, then pull it forwards
and off.
^ Unscrew upper hinge pin c using
the spanner supplied and refit on the
oppositie side.
^ Use a screwdriver to remove cover
b, then close the door.
^ Place cover plate a on the other
side.
^ Remove screw c completely.
^ Exchange cover i in the middle of
the appliance with hinge bracket e.
To do this:
Undo screws h, pull cover i and
hinge bracket e off to the side, turn
around and refit into position on the
opposite side.
^ Pull door support d together with
hinge pin e downwards, then tilt it
forwards and take it off.
^ Open the lower appliance door, move
it downwards and take it off.
^ With the upper door g closed, pull
hinge pin f downwards to remove it.
^ Open the upper door, and pull it
downwards and off.
38
Changing the door hinging
^ Pull bearing bush d downwards out
of hinge bracket e and refit it from
above into the hinge bracket.
^ Use a screwdriver to remove spacer
g and refit it on the opposite side.
Changing over the door handle:
^ Remove covers m at the front and
slide off to the side.
^ Unscrew handle k. Refit handle and
stoppers l on the opposite side.
^ Slide covers m into position making
sure they engage correctly.
Refitting the doors:
^ Remove plugs j from door bearing
bushes in the doors and refit on the
opposite side.
^ Turn door support b around, pull
hinge pin a out, and refit on the op-
posite side.
^ Hang the upper appliance door on
hinge pin c, and close the appliance
door.
^ Fit both parts into hinge plate f. To
do this push hinge pin a through
hinge plate f into door support b.
Swing door support out, push up-
wards and re-assemble with screw
c.
^ Push middle hinge pin f from below
through hinge bracket e into the up-
per appliance door.
^ Check that the door is correctly
aligned. If necessary align it using
the long slots in hinge bracket e.
^ Align the lower door with the appli-
ance housing using the long slot in
hinge plate f. Then tighten screw c.
^ Hang the lower door in hinge bracket
e then close the appliance door.
^ Refit plinth fascia d pushing it firmly
into position.
In the following illustration the lower
door is not shown in the closed posi-
tion to make it easier to see what
happens next.
^ With the lower door open, secure
cover e to the front of the plinth fas-
cia.
39
Building in the appliance
The air inlet and outlet must not be
covered or blocked in any way.
They should be dusted on a regular
basis.
When built into a kitchen run (max.
depth 580 mm) the appliance can be
installed directly next to a kitchen furni-
ture housing unit. The appliance door
b will protrude in front of furniture
fronts at the sides by 34 mm and by 51
mm in the middle of the door. This en-
ables the doors to be opened and shut
without being obstructed.
When installed next to a wall c a dis-
tance of approx. 36 mm is needed on
the hinge side between the wall and the
appliance, so that the doors and the
handles have sufficient space for open-
ing.
When securing to adjoining furniture
d or if a spacer is fitted between the
appliance and the wall, please note the
following:
The appliance can be installed in a
kitchen run. To match the height of the
rest of the kitchen, the appliance can
be fitted with a suitable top box a.
^ Ensure that the doors have sufficient
space for opening fully after the ap-
pliance has been secured.
A ventilation gap of at least 50 mm
depth must be allowed for behind the
appliance for air to circulate.
The cross section of the air outlet under
the room ceiling must be at least 300
cm2 to ensure that air can circulate
without hindrance. Otherwise the appli-
ance has to work too hard resulting in
an increase in electricity consumption.
The larger the cross section, the more
efficient the appliance.
^ Do not drill within the area marked
with criss cross pattern as this
would damage insulated parts of the
appliance.
^ To secure the appliance to adjoining
kitchen furniture use self-tapping
screws. The depth of the screw must
not exceed 10 mm. See small illustra-
tion.
40
41
42
43
Änderungen vorbehalten / 0903
M.-Nr. 05 910 950 / V01
KF 7544 SND ed-3
Dieses Papier besteht aus 100 % chlorfrei gebleichtem Zellstoff und ist somit umweltschonend.
|